#6501  #Kr-500F  #9501-605P  #MR-505A
 

#6501 is a reflective film to be applied onto the fabric with thermo and pressure. It is an open lens type reflective film, consisting of high index reflective micro glass beads, reflective layer and adhesive layer.
It is an epoch-making product and is designed to reflect more than 90% of entered light by means of a unique reflective layer.
It greatly enhances the night-time visibility of a wearer so it is very useful to prevent traffic accident. Its day-time appearance is bright grey, and it has very high reflectivity in silver white color at night.

TEST SPECIFICATION OF BS EN471

BS EN471:1994 Specification for High Visibility Clothing- Class 2 materials Clause 6.1 Retro-reflective performance requirements of new materials; and clause 6.2 Retro-reflective performance requirements after test exposures to abrasion, flexing, folding at cold temperatures, temperature variation, washing(50 cycle, drycleaning(25 cycle), and influence of rainfall.

REFLECTIVE PERFORMANCE (BS EN471) OF #6301 & #6501
#6501 fully meets and exceeds the requirements of BS EN471(Table 5, Class 2) and is thus suitable for Personal Protective Equipments(PPE) garments.

Entrance Angle/ Observation Angle
Typical
Minimal
EN-471
5°/12'(0.2)
580
550
330
5°20'(0.33 ° )
420
380
250
Tested in accordance with EN471
Entrance Angle(5°) is the angle between the light source and a line perpendicular to the reflective film. Observation Angle(12'/20') is the angle at which the light is reflected back from the reflective film to a observer.
APPLICATION INSTRUCTIONS

Applications

1.Draw the letters or marks on the protective paper and cut them with the scissor or cutter.
2.Remove the protective film from the back(then, dry adhesive appears).
3.Place the reflective film on the fabric products, such as garments and bags, and then cover the fabric with a cloth and press it firmly with hot iron at 130? for 10seconds.(take care to keep the dry adhesive side to contact the fabric)
4.Remove the protective film from the fabric after making sure the fabric after making sure the fabric is completely cooled down. Do not remove the protective film when the fabric is still warm.
5.Users should test beforehand if the sufficient adhesion is obtained and also the fabric may not be damaged by heating.
   
   
Copyright © Ajiveena Exports Ltd. 2004        
home! contact ! info ! site map